1. Press the power button. Windows Setup will be run automatically and will
   proceed to configure all the devices installed in the docking station. A 
   message will appear prompting you to insert a diskette containing the 
   ARTOP SCSI driver.

2. Select the option that enables you to skip the driver loading procedure. 
   Windows will be opened and the desktop will appear on the display.

3. Click on the Start button.

4. Select Settings/Control Panel.

5. Double click on the System icon.

6. Click on the Device Manager tab.

7. Click on Other devices, which is marked with a question mark.

8. Highlight the PCI SCSI bus controller and click on the Remove button and 
   then on OK.

9. Double click on the Add New Hardware icon in Control Panel.

10. Follow the instructions that appear in the windows displayed, selecting 
    No when prompted to specify if you want to search for a new component.

11. From the Hardware Type list, select hard disk controller.

12. When the window showing the manufacturer and model lists appears, insert
    the diskette and click on the Have Disk button.

13. Specify a:\win95 as the path from which the driver information is 
    to be loaded and then click on the OK button.

14. Follow the procedure through by clicking on the Next buttons and when the
    message appears indicating that the procedure has been completed, click 
    on the Finish button.

15. Restart the computer by clicking on the Start button, selecting Shut Down
    and then the Restart the computer option.

16. Windows is restarted and a message appears prompting you to restart the 
    computer again. Select No.

17. Using Explorer copy the tool85.exe file from the a:\ directory of the
    floppy disk into the C:\UTIL folder on the hard disk.

18. Now shut down the computer by selecting Start/Shut down/Shut down the 
    computer. The computer will automatically switch itself off.

19. Switch on the computer and, if you have installed a hard disk, format it
    by selecting the Run command from the Start menu, typing tool85, pressing
    ENTER and following the instructions that appear on the display.

It is not possible to partition and format the hard disk using the standard 
fdisk or format commands.

