ERS II and
ERS/FT II
Appendix A - Specifications
ISA - System Architecture
| Passive ISA Multisegmented Backplane (8 groups of 2 slots each with shunt capability for 15 configurations) |
16 slots total |
| Slot Spacing | 0.8" |
| Maximum Board Height | 5.5" |
| Maximum Board Length | 13.33" |
| Bus Speed | 8 MHZ |
Subsystem Configurations
| No of Groups | Slots per Group |
| Eight | 2+2+2+2+2+2+2+2 |
| Seven | 4+2+2+2+2+2+2 |
| Six | 6+2+2+2+2+2 4+4+2+2+2+2 |
| Five | 4+4+4+2+2 6+4+2+2+2 |
| Four | 8+4+2+2 6+6+2+2 4+4+4+4 |
| Three | 8+6+2 8+4+4 6+6+4 |
| Two | 10+6 8+8 14+2 |
| One | 16 |
| Passive EISA and EISA/ISA Multisegmented Backplane (8 groups of 2 slots each with shunt capability for 13 configurations) | 16 slots total |
| Slot Spacing | 0.8" |
| Maximum Board Height | 5.5" |
| Maximum Board Length | 13.33" |
| Bus Speed | 8 MHZ |
Subsystem Configurations
| No of Groups | Slots per Group |
| Eight | 2E+2E+2E+2E+2E+2E+2E+2E |
| Six | 4E+4E+2I+2I+2I+2I |
| Five | 4E+4E+4I+2I+2I 8E+2I+2I+2I+2I |
| Four | 8E+4I+2I+2I 8E2I+2I+2I+2I 4E+4E+4E+4E 4E+4E+6I+2I 4E+4E+4I+4I |
| Three | 8E4I+2I+2I 8E+4I+4I 8E+6I+2I 4E+4E+8I |
| Two | 8E4I+4I 8E6I+2I 8E+8I 8E+8E |
| One | 8E8I |
Drive Accommodations
Standard Bay Configuration
| Maximum 3.5" Floppy Drives | 1 |
| Maximum Third-Height 3.5" Hard Drives or Maximum Mini 2.5" Hard Drives |
8 16 |
Optional Bay Configuration
| Maximum 3.5" Floppy Drives | 1 |
| Maximum Half Height 3.5" Tape Drives | 1 |
| Maximum Third Height 3.5" Hard Drives or Maximum Mini 2.5" Hard Drives |
6 12 |
Optional Bay Configuration
| Maximum 3.5" Floppy Drives | 1 |
| Maximum Half Height 5.25" CD ROM Drives | 1 |
| Maximum Half Height 3.5" Tape Drives | 1 |
| Maximum Third-Height 3.5" Hard Drives or Maximum Mini 2.5" Hard Drives |
4 8 |
Mechanical
| Rack Mount Enclosure | Standard 19" RETMA |
| Faceplate Dimensions | 19" wide x 8.60" high |
| Enclosure Dimensions | 17.50" wide x 8" high x 25.25" deep |
Integral Multiplexor
| Type | Electronic |
| Number of Channels | 8 (9 on the ERS/FT II) |
| VGA Video Support | Yes |
| PS/2 Compatible Keyboard Support | Yes |
| PS/2 Compatible Mouse Support | Yes |
| IBM AT Compatible Floppy Drive Support | Yes |
| Connector - contains video, keyboard, mouse signals | DB-25 male |
Front Panel Control
| Keyswitch to Lock/Unlock Console | Yes |
| Multiplexor Enable/Disable Switch | Yes |
| Increment/Decrement Processor Number Select | Yes |
| Increment/Decrement Multiport (MP) Board Select | Yes |
| Increment/Decrement MP Serial Port Select | Yes |
| Port Activity Indicators | Yes |
| LAN Activity Indicator | Yes |
| Disk Activity Indicator | Yes |
| Shared Reset Pushbutton | Yes |
ERS/FT II Front Panel Only
| Group Power On/Off | Yes |
| Alarm Speaker Off Pushbutton | Yes |
| Dual Power Supply On-line & Fault Indicators | Yes |
| Fan On-line & Fault Indicator | Yes |
| Data Highway On-line & Fault Indicator | Yes |
| Subsystem Health Indicator | Yes |
| Environmental Alert Indicator | Yes |
Rear Panel Connections
| Video Out Connector | DB-25, female pins |
| Video In Connector | DB-25, female pins |
| Power Supply 1 (PS1): | |
| ... Receptacle | IEC 320, 10a, male pins |
| ... On/Off Switch | Yes |
| ... AC Power On Indicator | Yes |
ERS/FT II Rear Panel Only:
| Power Supply 2 (PS2): | |
| ... Receptacle | IEC 320, 10a, male pins |
| ... On/Off Switch | Yes |
| ... AC Power On Indicator | Yes |
| IES I/O Connectors | Dual RJ-45 |
Power Supply
| Ratings | |
| +5vdc | 57 amps |
| +12vdc (steady state) | 4.5 amps |
| +12vdc (Peak) | 10 amps |
| -12vdc | 1.2 amps |
| -5vdc | .5 amps |
| Maximum DC Power | 356 watts (steady state) 422 watts (peak) |
Input Power Ratings
| 115 VAC + 10% | 6.5 amps |
| 230 VAC + 10% | 3.3 amps |
Fuses
| current rating, fuse type | |
| DC Fuses | |
| +5vdc (ISA slot, F1-F16) (located on backplane) | 8 amp, 5x20mm |
| +5vdc (multiplexed floppy - F17) (located on backplane) | 8 amp, 5x20mm |
| +5vdc (keyboard - F1) (located on mux board) | .8 amp, 5x20mm |
| AC Fuses (located inside power supply - serviceable only by Cubix authorized factory representative) | |
| 125 VAC | 8A amp, T |
| 250 VAC | 4A amp, T |
Operating Environment
| Temperature (measured at each of 4 fan inlets) | 0 - 40 C |
| Non-Condensing Humidity | 5 - 80% |
Heat Exhaust Fans
| Power Supply (each) | one 80mm, 44 CFM |
| ISA Processor Bay | two 120mm, 73 CFM |
Optional Equipment
| Bus Controller Processors | Cubix BC Series |
| Communications Processors | Cubix QL Series |
| Line Busy Module | Yes |
| Network Interface Controller | Multiple Sources |
| Specialized Controllers (e.g. fax, X.25, 3570, etc) |
Multiple Sources |
Warranty
| Parts and labor return-to-manufacturer | 1 year |
Compliance
| FCC | Class A |
This document, and all Web contents, Copyright © 1997 by Cubix Corp., Carson City, NV, USA.