Errata Sheet This is an ASCII file called Errata.TXT in the ATI CardAssistant INFO directory. Use a text editor or a word processor with a mono-space font such as Courier to print this file if needed for reference. ************************************************************ ** ** ** Errata Sheet ** ** ** ************************************************************ ------------------------------------------------------------ -- Contents -- ------------------------------------------------------------ I. AT-2700FTX II. AT-2745FX I. AT-2700FTX ============= 1. For the NDIS 2, NDIS 3.0 Enhanced (WFW), DOS ODI, and the 32-bit ODI drivers: When the AT-2700FTX adapter card is set to Auto Negotiate, the LED's for speed and duplex will not illuminate. The Adapter card is Auto Negotiating, it just will not indicate proper speed and duplex. This does not affect the function of the card except for the LED's. 2. The copper port on the AT-2700FTX will not "wake up" using Wake on LAN. II. AT-2745FX ============= 1. When using the NDIS 3.0 Miniport driver (Windows 95a) on the AT-2745FX adapter card, it will not communicate if the adapter is set in hardware with SETUP to 10Mb / Full, except when the software driver is set to 10Mb / Full as well. A simple change of the speed and duplex setting in SETUP to any other setting will fix this issue. 2. The 10Mb fiber port on the AT-2745FX will not "wake up" using Wake on LAN.