Diagnostics LED
This is an ASCII file called DIAGLED.TXT in the ATI 
CardAssistant \TXT\GENERAL directory. Use a text editor or  
word processor with a mono-space font such as Courier 
to print this file if needed for reference.
************************************************************
**                                                        **
**            Functions of the Diagnostics LED            **
**                                                        **
************************************************************

 LNK: Indicates the adapter is connected to a hub or switch 
      and is receiving link pulses. If the LNK light is
      not illuminated, double-check the cabling first. Make
      sure to use Category 3 type UTP cabling or above in a 
      "straight-through" configuration when connecting to a
      hub or switch. When connecting to another network 
      interface card, use a "cross-over" configuration. Also
      make sure the hub or switch is transmitting at the
      correct speed and the drivers are loaded in memory.

      See the UTP topic in the file UTP_CBL.TXT for more
      information.

      On a thinnet segment, make sure cabling conforms to
      10Base2 rules for length, node spacing and termination.
      See the thinnet topic in the file RG58_CBL.TXT.

*  Third-party trademarks are the property of their 
   respective owners.




